Water Well Repair & Maintenance in East Texas
When your water stops flowing or your pressure drops, you need a team that can diagnose the problem fast and fix it right the first time. We service wells and pumps across Tyler and 11 East Texas counties.
Common Water Well Problems in East Texas
East Texas wells face a specific set of challenges tied to our local geology and climate. The Carrizo-Wilcox Aquifer produces excellent water, but the iron content can clog screens over time, clay layers can shift during drought, and the sand formations that make good aquifers can also produce sediment when pump screens deteriorate.
Common issues we diagnose and repair include:
- Complete loss of water: Pump failure, electrical fault, or a significant drop in water level.
- Low or fluctuating water pressure: Pressure tank failure, worn pump impellers, leaking drop pipe, or a partially clogged screen.
- Pump short cycling: The pump turns on and off rapidly — usually a waterlogged pressure tank or a malfunctioning pressure switch.
- Sand or sediment in water: Damaged screens, pump positioned too deep, or a deteriorating casing allowing surface material in.
- Cloudy, discolored, or bad-smelling water: Can indicate bacterial contamination, iron bacteria, or hydrogen sulfide gas — all treatable but needing diagnosis.
- High electric bills from the well pump: A struggling or undersized pump draws excessive current.
Emergency Well Repair Services
Losing your water supply is not something that can wait. Whether a storm knocked out your pump, your pressure tank failed, or your well simply stopped producing, we prioritize emergency service calls and work to restore your water as quickly as possible.
We carry common replacement parts — pressure switches, control boxes, capacitors, check valves, and various pump sizes — so many repairs can be completed in a single visit without waiting for parts to ship.
Preventive Well Maintenance Programs
The best time to fix a problem is before it happens. A scheduled annual inspection costs a fraction of an emergency pump replacement and can extend the life of your system by years. Our preventive maintenance includes:
- Flow rate and pressure testing to detect gradual declines
- Pressure tank inspection — checking pre-charge, bladder integrity, and switch settings
- Visual wellhead inspection for cracks, improper seals, or surface water intrusion risks
- Electrical system check — amperage draw, wire condition, and control box function
- Water quality screening for bacteria, iron, pH, and hardness
We recommend scheduling your annual inspection in the spring, before the summer heat drives peak water demand. This ensures your system is in top condition when you need it most.
Well Pump Repair & Troubleshooting
Not every pump problem requires a full replacement. Many issues — a blown capacitor, a tripped overload, a faulty pressure switch, or a stuck check valve — can be resolved with a targeted repair at a fraction of the cost of a new pump.
Our technicians carry diagnostic tools including amp meters, megohm testers, and pressure gauges to accurately identify the failing component. We explain the diagnosis, provide a repair estimate, and only proceed with your approval.
How Often Should a Water Well Be Serviced?
The National Ground Water Association recommends annual inspections for all private water wells. Beyond the annual checkup, you should schedule a service call any time you notice a change in water pressure, water quality, or pump behavior. Early intervention almost always saves money.
Frequently Asked Questions About Well Repair
The National Ground Water Association recommends having your water well system inspected at least once a year. An annual checkup should include a flow test, a pressure tank inspection, a visual inspection of the wellhead and casing, and a water quality test. Regular maintenance extends the life of your pump and catches small problems before they become expensive failures.
Low water pressure can result from several issues: a waterlogged pressure tank, a failing pressure switch, a worn pump, a cracked or leaking drop pipe, a clogged well screen, or even a drop in the aquifer water level. A diagnostic visit will isolate the cause so we can fix the right component.
Yes. Sand in well water can indicate a damaged well screen, a pump set too deep, or a deteriorating casing. We diagnose the cause and recommend the appropriate repair — whether that is repositioning the pump, installing a sand separator, or rehabilitating the well screen.
Yes. We understand that losing your water supply is an emergency. Call us and we will schedule the earliest available service call to get your water flowing again. For after-hours emergencies, leave a message and we will return your call as quickly as possible.
Repair costs depend entirely on the problem. A simple pressure switch replacement may cost $150 to $300, while pulling and repairing a submersible pump can range from $800 to $3,000 or more. We provide a diagnostic assessment and a written estimate before performing any repairs.
Well Not Working? We Can Help.
Call Tyler Water Wells for fast, professional well repair service anywhere in East Texas.
Call 903-403-3237